Equipment Specifications Library
Basic Model Information
-
Manufacturer:Marais
-
Model:Sidecut SC3C
View Manufacturers View Models
Additional Info
MANUFACTURES EQUIPMENT SPECIFICATIONS:
Specific Features:
-Dry microtrenching with a vacuum system in option.
-Limited size of the vehicle, which allows cutting in sidewalks.
-Sound proofing of the components.
-No blasting and no dust during the burying works.
-Quick network deployment process.
Assets:
-The microtrench and the job site are clean.
-Speed of execution.
-No disturbance to pedestrians during the works.
-Limited disturbance to residents.
-Increased safety of the jobsite.
-No damage to road foundations.
-Sidewalk can be used again very soon.
-Reduction in building costs.
-Trenching in curbs.
Sizes and Weight of the unit:
-Length in working position: between 4.80 m and 5.30 m depending on the adapted tool
-Length in transport position: between 4.50 m and 5 m depending on the adapted tool
-Width : 1.10 m
-Height : 1 m
-Height: 1.80 m at the level of the gallows
-Weight with Tool: Between 4 and 4.5 tons depending of the tool
Technical Features of the Cutting Tool:
-Cutting Depth: from 250 to 800 mm
-Offset of 150 mm
-5 Axis Pivot mounted cutting tool
-Maximum Inclination +/- 15°
-Tracked Tractor
-Diesel Heat Engine 100 ch (73.6 kW)
-Hydrostatic Advance
Specific Features:
-Dry microtrenching with a vacuum system in option.
-Limited size of the vehicle, which allows cutting in sidewalks.
-Sound proofing of the components.
-No blasting and no dust during the burying works.
-Quick network deployment process.
Assets:
-The microtrench and the job site are clean.
-Speed of execution.
-No disturbance to pedestrians during the works.
-Limited disturbance to residents.
-Increased safety of the jobsite.
-No damage to road foundations.
-Sidewalk can be used again very soon.
-Reduction in building costs.
-Trenching in curbs.
Sizes and Weight of the unit:
-Length in working position: between 4.80 m and 5.30 m depending on the adapted tool
-Length in transport position: between 4.50 m and 5 m depending on the adapted tool
-Width : 1.10 m
-Height : 1 m
-Height: 1.80 m at the level of the gallows
-Weight with Tool: Between 4 and 4.5 tons depending of the tool
Technical Features of the Cutting Tool:
-Cutting Depth: from 250 to 800 mm
-Offset of 150 mm
-5 Axis Pivot mounted cutting tool
-Maximum Inclination +/- 15°
-Tracked Tractor
-Diesel Heat Engine 100 ch (73.6 kW)
-Hydrostatic Advance
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.