Close

• Manufacturer:
  Takeuchi
• Model:
  TB230

MACHINE DIMENSIONS
Maximum Reach: 15 ft 10.9 in (4,850 mm)
Maximum Reach at Ground Level: 15 ft 5.4 in (4,710 mm)
Maximum Digging Depth: 9 ft 3.6 in (2,835 mm)
Maximum Vertical Digging Depth: 7 ft 0.8 in (2,153 mm)
Maximum Dig Height: 14 ft 7.0 in (4,450 mm)
Maximum Dumping Height: 10 ft 7.2 in (3,230 mm)
Front Swing Radius: 6 ft 2.7 in (1,895 mm)
Front Swing Radius with Boom Offset: 4 ft 11.2 in (1,505 mm)
Tail Swing (Slew) Radius: 4 ft 4.4 in (1,330 mm)
Transport Length: 15 ft 0.9 in (4,595 mm)
Transport Height: 8 ft 3.9 in (2,540 mm)
Ground Clearance: 11.9 in (305 mm)
Undercarriage Length: 6 ft 2.9 in (1,900 mm)
Track Width (Rubber): 11.8 in (300 mm)
Undercarriage Width: 4 ft 9.5 in (1,460 mm)

OPERATING PERFORMANCE
Operating Weight: 6,360 lb (2,885 kg)
Maximum Bucket Breakout Force: 6,471 lb (2,935 kg)
Maximum Arm Digging Force: 2,900 lb (1,325 kg)
Arm Length: 4 ft 9.0 in (1,445 mm)
Slew Speed: 10.3 rpm
Traction Force: 6,340 lb (2,876 kg)
Ground Pressure: 4.3 psi (29.6 kPa)
Travel Speed - Low: 1.8 mph (2.9 km / hr)
Travel Speed - High: 3.2 mph (5.2 km / hr)

HYDRAULIC SYSTEM
Total Hydraulic Flow: 24.2 gpm (91.6 L / min)
Auxiliary Flow - Primary Circuit: 13.4 gpm (50.6 L /min)
Hydraulic System Pressure: 3,046 psi (21.0 MPa)

ENGINE
Make / Model: Yanmar / 3TNV88F
Displacement: 81.0 cu in (1.3 L)
Horsepower @ 2,400 rpm: 24.4 hp (18.2 kW)
Maximum Torque @ 1,440 rpm: 63.0 ft-lb (85.4 Nm)

FLUID CAPACITIES
Engine Lubrication: 5.0 qt (4.7 L)
Cooling System: 4.2 qt (4.0 L)
Fuel Tank Capacity: 12.2 gal (46.0 L)
Fuel Consumption (65% of Full Load): 0.8 gal / hr (3.3 L / hr)
Hydraulic Reservoir Capacity: 9.2 gal (35.0 L)
Hydraulic System Capacity: 14.8 gal (56.0 L)