Equipment Specifications Library
Basic Model Information
-
Manufacturer:HammerHead
-
Model:HB3038
View Manufacturers View Models
Additional Info
The HB3038 system is highly efficient, simple to set up, easy to operate and leaves a small foot print for the down hole unit. HB3038 systems are fast, a typical 400' (122 m) job takes only a two hour round trip from payout to completion.
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.