Equipment Specifications Library
Basic Model Information
-
Manufacturer:Vermeer
-
Model:SC30TX
View Manufacturers View Models
Additional Info
KEY FEATURES
LONGEST TRACKS IN ITS CLASS: Provides consistent stability with easier loading and unloading of the machine compared to shorter tracked models. The longer tracks offer best-in-class low ground pressure, which helps reduce the possibility of turf damage.
SMOOTH OPERATION: The exclusive SmartSweep control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.
PATENTED YELLOW JACKET CUTTER SYSTEM: The Vermeer-exclusive Yellow Jacket cutter system is designed to provide faster, easier serviceability, as well as extended pocket and tooth life.
25 HP (18.6 KW) EFI ENGINE: Starts well during cold weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.
OPERATOR PRESENCE SYSTEM: Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.
HYDRAULICALLY DRIVEN CUTTER WHEEL AND GROUND DRIVE: The elimination of belts or chain drives reduces service and maintenance.
GENERAL
-Length: 94" (238.8 cm)
-Width: 35" (88.9 cm)
-Height: 49" (124.5 cm)
-Weight: 1550 lb (703.1 kg)
ENGINE
-Make and model: Kohler ECH740 EFI
-Number of cylinders: 2
-Max gross horsepower: 25 hp (18.6 kW)
-Max torque: 42 ft-lb (56.9 Nm)
-Fuel tank capacity: 6.8 gal (25.7 L)
-Fuel type: Gas
-Air cleaner: 6" (15.2 cm) 2-stage dry
-Oil flter: Spin-on
-Oil volume with filter: 2 qt (1.9 L)
-Cooling medium: Air/Oil
CUTTER WHEEL DRIVETRAIN
-Cutter wheel diameter without teeth: 16" (40.6 cm)
-Cutter wheel thickness: .5" (1.3 cm)
-Cutter wheel straight-line dimension: 35.5" (90.2 cm)
-Cutter wheel cut above ground: 25" (63.5 cm)
-Cutter wheel cut below ground: 12" (30.5 cm)
-Tooth description: Yellow Jacket™ cutter system
-Number of teeth: 16
-Number of indexes: 2
-Number of pockets: 16
-Reversible pockets: Yes
-Cutter wheel guard: Yes
-Chip containment: 2.2 cu ft (.1 m3)
HYDRAULIC SYSTEM
-Tank capacity: 9 gal (34.1 L)
-Recommended oil type: ISO 68
-Filtration method: In-line return filter
-Pump flow at max rpm: 16 gpm (60.6 L/min)
-System relief pressure: 2750 psi (189.6 bar)
-Flow control: SmartSweep control system
-Directional control: Standard
-Oil cooler: Fan-cooled
ELECTRICAL SYSTEM
-System voltage: 12 V
-Battery: 405
-Standard gauge: Hour meter/tach
-Switches: Cutter wheel drive
-Controller: Yes
TRACK DRIVE SYSTEM
-Track type: Rubber 7" (17.8 cm) width
-Track length on ground: 31.4" (79.8 cm)
-Type of idler: Cast
-Number of idlers: 5
-Track drive pump type: Hydrostatic
-System relief pressure: 2900 psi (199.9 bar)
-Pump flow at max rpm: 11.4 gpm (43.2 L/min)
-High-speed travel: 3.2 mph (5.1 km/h)
-Ground-bearing pressure - soft ground: 3.4 psi (23.4 kPa)
LONGEST TRACKS IN ITS CLASS: Provides consistent stability with easier loading and unloading of the machine compared to shorter tracked models. The longer tracks offer best-in-class low ground pressure, which helps reduce the possibility of turf damage.
SMOOTH OPERATION: The exclusive SmartSweep control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.
PATENTED YELLOW JACKET CUTTER SYSTEM: The Vermeer-exclusive Yellow Jacket cutter system is designed to provide faster, easier serviceability, as well as extended pocket and tooth life.
25 HP (18.6 KW) EFI ENGINE: Starts well during cold weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.
OPERATOR PRESENCE SYSTEM: Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.
HYDRAULICALLY DRIVEN CUTTER WHEEL AND GROUND DRIVE: The elimination of belts or chain drives reduces service and maintenance.
GENERAL
-Length: 94" (238.8 cm)
-Width: 35" (88.9 cm)
-Height: 49" (124.5 cm)
-Weight: 1550 lb (703.1 kg)
ENGINE
-Make and model: Kohler ECH740 EFI
-Number of cylinders: 2
-Max gross horsepower: 25 hp (18.6 kW)
-Max torque: 42 ft-lb (56.9 Nm)
-Fuel tank capacity: 6.8 gal (25.7 L)
-Fuel type: Gas
-Air cleaner: 6" (15.2 cm) 2-stage dry
-Oil flter: Spin-on
-Oil volume with filter: 2 qt (1.9 L)
-Cooling medium: Air/Oil
CUTTER WHEEL DRIVETRAIN
-Cutter wheel diameter without teeth: 16" (40.6 cm)
-Cutter wheel thickness: .5" (1.3 cm)
-Cutter wheel straight-line dimension: 35.5" (90.2 cm)
-Cutter wheel cut above ground: 25" (63.5 cm)
-Cutter wheel cut below ground: 12" (30.5 cm)
-Tooth description: Yellow Jacket™ cutter system
-Number of teeth: 16
-Number of indexes: 2
-Number of pockets: 16
-Reversible pockets: Yes
-Cutter wheel guard: Yes
-Chip containment: 2.2 cu ft (.1 m3)
HYDRAULIC SYSTEM
-Tank capacity: 9 gal (34.1 L)
-Recommended oil type: ISO 68
-Filtration method: In-line return filter
-Pump flow at max rpm: 16 gpm (60.6 L/min)
-System relief pressure: 2750 psi (189.6 bar)
-Flow control: SmartSweep control system
-Directional control: Standard
-Oil cooler: Fan-cooled
ELECTRICAL SYSTEM
-System voltage: 12 V
-Battery: 405
-Standard gauge: Hour meter/tach
-Switches: Cutter wheel drive
-Controller: Yes
TRACK DRIVE SYSTEM
-Track type: Rubber 7" (17.8 cm) width
-Track length on ground: 31.4" (79.8 cm)
-Type of idler: Cast
-Number of idlers: 5
-Track drive pump type: Hydrostatic
-System relief pressure: 2900 psi (199.9 bar)
-Pump flow at max rpm: 11.4 gpm (43.2 L/min)
-High-speed travel: 3.2 mph (5.1 km/h)
-Ground-bearing pressure - soft ground: 3.4 psi (23.4 kPa)
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.